News

Home > News

How to Paste Pvc Decorative Film?

Apr. 09, 2021


How to paste pvc decorative film wood grain film? It’s right to start from these steps. The step-by-step operation is very simple. The PVC Wood Grain Film Supplier will share with you:


PVC Wood Grain Film

PVC Wood Grain Film


1. Primary processing and testing


Before you get the PVC Decorative Film, you need to check the basic effect of the film position. The basic effect can be as long as the flatness meets the standard. So how to check the flatness of the grassroots? Let me tell you a little trick. When testing the flatness of the pasted base layer, you can use a horizontal ruler to stick it tightly on the base layer, and then insert it with a piece of A4 paper to see if it can be taken out smoothly and can be taken out. , Basically it is uneven. In addition, use a flashlight to light it from one side to see if the effect of light transmission is uniform, which can also be tested. After the flatness is reached, I look at the material problem of the grassroots.


2. Brush the base oil and polish


Apply the primer, and apply a special primer on the flat base layer before sticking the film. This is very particular. First of all, remember not to over-dilute in order to save money. If you basically can't use it, you will lose more in the end. The second is the polishing of the primer. Many of my friends don’t understand why it is necessary to polish after the primer is applied, because after the primer is applied, it is necessary to wait for the primer to dry. During this process, particles or glue spots will appear on the surface. If you post it directly, a "pocky face" will appear. Just after the primer is dried, use a gauze cloth to simply polish it to apply the film.


3. PVC decorative film operation


This is also the final step. After the novice sticks the film, there will be blistering, unevenness, dead-folding and other problems. Don't panic. First, make a gesture to see if the cut film matches the pasting position. Before sticking the film, position it from one side, and then push it to the other side. Do not remove the release paper at one time. Push and remove the release paper at the same time. Every place needs to be compacted. This can avoid the occurrence of blistering, and there will be no deadlocks, and the effect will be smooth after the film is applied. Even if there is a problem in the middle, it can be corrected in time.


After understanding these filming tips, it will help you step into the door step by step on the road of PVC Wood Grain Film decorative film filming. The film industry is not difficult. The difficulty is to maintain a normal attitude, not to be impatient, pay attention to details, this is the necessity of PVC decorative film.